Viewing an older house? A 10-minute wiring check
By Ian Walsh, Renew Electrical, 22 November 2026
At a viewing, look at the fuse board, count the sockets in each room, check for sockets low on the skirting or round-pin plugs, look for old rubber or fabric-covered cable where you can see it, and ask when the house was last rewired. None of it replaces a survey, but it tells you whether to budget for a rewire before you bid.
Most people find out a house needs rewiring after they’ve agreed the price. Ten minutes at a viewing can tell you whether to budget for one before you bid. Take this list with you.
The checklist
- The fuse board. Find it: often under the stairs, in the hall or in the hot press. Old rewirable fuses, a wooden backing board, or a small board with only a few switches point to old wiring. A newer board with a row of switches is a better sign, but it doesn’t tell you what’s behind the walls.
- The test button. A modern board has an RCD with a “T” or “Test” button. No test button anywhere usually means no RCD protection.
- Sockets per room. Count them. Two or three in a living room or bedroom is a house wired for a lamp and a radio, not for how people live now.
- Where the sockets are. Sockets low on the skirting board, or round-pin sockets, are a sign of very old wiring.
- Extension leads. Leads and adaptors running round the rooms mean the house has outgrown its wiring.
- Switches and sockets. Look for cracked, scorched or discoloured fittings, and old brown or cream switches.
- Visible cable. In the attic, under the stairs or at the board, black rubber or fabric-covered cable is original old wiring.
- Lights. Flickering lights, or a board the sellers say “trips now and then”, are worth noting.
- The kitchen and bathroom. Cables run along the surface of the walls suggest work added over the years.
- Ask the question. “When was the house last rewired, and is there a Safe Electric certificate?” If nobody knows, assume it hasn’t been.
What the signs mean
One sign on its own isn’t a verdict. Several together (an old board, few sockets, old cable) usually mean the house needs a full rewire, and it’s worth budgeting for one before you bid. A house with a newer board and plenty of sockets may still have old cable in some rooms, so a partial rewire is sometimes the answer. More detail in signs your house needs rewiring.
What to do next
- Before you own it: send us the size of the house on WhatsApp, or use the rewire cost calculator, and we’ll send you the usual range for a house that size. Send on the electrical part of the surveyor’s report if you have it. It helps me when I survey.
- Once you have access: book a free survey. I walk the house room by room and you get an itemised quote, with no obligation to go ahead.
- Plan it before you move in. An empty house is the right time: the floors can come up and nobody has to live around the work.
Safety first
If you see a socket that’s scorched, hot or smells of burning at a viewing, tell the seller or agent and don’t use it. If there is a fire, call 999.
Quick answers
Can I tell at a viewing whether a house needs rewiring?
You can spot the clues: an old fuse board, very few sockets, old cable. The cable inside the walls is what decides it, and only a survey can confirm that.
Should I get the wiring checked before I buy?
If the house was built or last rewired a long time ago, it's worth knowing before you agree a price. Send us the electrical part of the surveyor's report and the size of the house for a rough range, then book a survey once you have access.
Does a building surveyor check the wiring?
A building surveyor usually notes what they can see and may recommend an electrical test. They don't test the circuits. That's an electrician's job.